An addon for the new Kinect For Windows V2 sensor. Based on the excellent work by the https://awesomeopensource.com/project/OpenKinect/libfreenect2 team ( @JoshBlake @floe and @christiankerl plus others )
linux64, see detailed installation instructions here.
linuxarmv7l, see detailed installation instructions here.
Please follow the steps exactly:
1. Download Zadig from http://zadig.akeo.ie/. 2. Run Zadig and in options, check "List All Devices" and uncheck "Ignore Hubs or Composite Parents" 3. Select the "Xbox NUI Sensor (composite parent)" from the drop-down box. (Important: Ignore the "NuiSensor Adaptor" varieties, which are the adapter, NOT the Kinect) The current driver will list usbccgp. USB ID is VID 045E, PID 02C4 or 02D8. 4. Select libusbK (v18.104.22.168 or newer) from the replacement driver list. 5. Click the "Replace Driver" button. Click yes on the warning about replacing a system driver. (This is because it is a composite parent.) To uninstall the libusbK driver (and get back the official SDK driver, if installed): 1. Open "Device Manager" 2. Under "libusbK USB Devices" tree, right click the "Xbox NUI Sensor (Composite Parent)" device and select uninstall. 3. Important: Check the "Delete the driver software for this device." checkbox, then click OK. If you already had the official SDK driver installed and you want to use it: 4. In Device Manager, in the Action menu, click "Scan for hardware changes." This will enumerate the Kinect sensor again and it will pick up the K4W2 SDK driver, and you should be ready to run KinectService.exe again immediately. You can go back and forth between the SDK driver and the libusbK driver very quickly and easily with these steps.
Huge thanks to @christiankerl for a lot of the recent changes that made this work well on OS X.