This repository was formerly known as TS100, it's the same great code. Just with more supported devices
Originally conceived as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.
The firmware implements all of the standard features of a "smart" soldering iron, with lots of little extras and tweaks. I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
For soldering irons that are designed to be powered by "smart" power sources (QC and PD), the firmware supports settings around the negotiated power and voltage. For soldering irons that are designed to be powered by batteries (TS100), settings for a cutoff voltage for battery protection are supported.
There are 25 languages currently supported as of present. When downloading the firmware for your soldering iron take note of the language code in the file name.
This project is considered feature complete for use as a soldering iron, so please suggest any feature improvements you would like!
This firmware does NOT support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode.
To get started with this firmware, please jump over to here
For notes on installation for your device, please refer to the Flashing Guide.
This new firmware uses a new menu system to allow access to the settings on the device. When on the main screen, the unit shows a pair of prompts for the two most common operations.
Detailed operation details are over in the Menu information.
Especially to the following users, who have helped in various ways that are massively appreciated:
Plus the huge number of people who have contributed translations, your effort is massively appreciated.
The code created by the community is GNU GPLv3. Unless noted elsewhere. Other components such as FreeRTOS/USB-PD have their own licence.
This software is provided as-is, so I cannot provide any commercial support for the firmware. However, you are more than welcome to distribute links to the firmware or provide irons with this software on them. Please do not re-host the files, but rather link to this page, so that there are no old versions of the firmware scattered around.