Awesome Open Source
Awesome Open Source

Description

This project measures the wind in km/h and reports the value via MQTT. I used that for retrieving my blind if the wind is 4 BFT (20 km/h) or higher.

Hardware

The following hardware is used for building this project:

Wiring

I connected the anemometer with the D7 and GND Pin of my Wemos D1. But it can be all other suitable Pins used.

Software

For using this software you have to copy the myconfig_samples.h to myconfig.h and change the values for the MQTT server and the WLAN settings.


Get A Weekly Email With Trending Projects For These Topics
No Spam. Unsubscribe easily at any time.
C Plus Plus (369,542
Arduino (21,651
Mqtt (2,998
Esp8266 (2,931
Diy (728
Esp8266 Arduino (496
Wind (82
Fhem (73
Anemometer (15
Related Projects