kube-hunter hunts for security weaknesses in Kubernetes clusters. The tool was developed to increase awareness and visibility for security issues in Kubernetes environments. You should NOT run kube-hunter on a Kubernetes cluster that you don't own!
Run kube-hunter: kube-hunter is available as a container (aquasec/kube-hunter), and we also offer a web site at kube-hunter.aquasec.com where you can register online to receive a token allowing you to see and share the results online. You can also run the Python code yourself as described below.
Explore vulnerabilities: The kube-hunter knowledge base includes articles about discoverable vulnerabilities and issues. When kube-hunter reports an issue, it will show its VID (Vulnerability ID) so you can look it up in the KB at https://aquasecurity.github.io/kube-hunter/
If you're interested in kube-hunter's integration with the Kubernetes ATT&CK Matrix Continue Reading
Contribute: We welcome contributions, especially new hunter modules that perform additional tests. If you would like to develop your modules please read Guidelines For Developing Your First kube-hunter Module.
kube-hunter now supports the new format of the Kubernetes ATT&CK matrix. While kube-hunter's vulnerabilities are a collection of creative techniques designed to mimic an attacker in the cluster (or outside it) The Mitre's ATT&CK defines a more general standardised categories of techniques to do so.
You can think of kube-hunter vulnerabilities as small steps for an attacker, which follows the track of a more general technique he would aim for. Most of kube-hunter's hunters and vulnerabilities can closly fall under those techniques, That's why we moved to follow the Matrix standard.
Some kube-hunter vulnerabities which we could not map to Mitre technique, are prefixed with the
There are three different ways to run kube-hunter, each providing a different approach to detecting weaknesses in your cluster:
Run kube-hunter on any machine (including your laptop), select Remote scanning and give the IP address or domain name of your Kubernetes cluster. This will give you an attackers-eye-view of your Kubernetes setup.
You can run kube-hunter directly on a machine in the cluster, and select the option to probe all the local network interfaces.
You can also run kube-hunter in a pod within the cluster. This indicates how exposed your cluster would be if one of your application pods is compromised (through a software vulnerability, for example). (
First check for these pre-requisites.
By default, kube-hunter will open an interactive session, in which you will be able to select one of the following scan options. You can also specify the scan option manually from the command line. These are your options:
To specify remote machines for hunting, select option 1 or use the
--remote option. Example:
kube-hunter --remote some.node.com
To specify interface scanning, you can use the
--interface option (this will scan all of the machine's network interfaces). Example:
To specify a specific CIDR to scan, use the
--cidr option. Example:
kube-hunter --cidr 192.168.0.0/24
--k8s-auto-discover-nodes flag to query Kubernetes for all nodes in the cluster, and then attempt to scan them all. By default, it will use in-cluster config to connect to the Kubernetes API. If you'd like to use an explicit kubeconfig file, set
Also note, that this is always done when using
In order to mimic an attacker in it's early stages, kube-hunter requires no authentication for the hunt.
Impersonate - You can provide kube-hunter with a specific service account token to use when hunting by manually passing the JWT Bearer token of the service-account secret with the
$ kube-hunter --active --service-account-token eyJhbGciOiJSUzI1Ni...
When runing with
--pod flag, kube-hunter uses the service account token mounted inside the pod to authenticate to services it finds during the hunt.
--service-account-tokenflag takes priority when running as a pod
Active hunting is an option in which kube-hunter will exploit vulnerabilities it finds, to explore for further vulnerabilities. The main difference between normal and active hunting is that a normal hunt will never change the state of the cluster, while active hunting can potentially do state-changing operations on the cluster, which could be harmful.
By default, kube-hunter does not do active hunting. To active hunt a cluster, use the
--active flag. Example:
kube-hunter --remote some.domain.com --active
You can see the list of tests with the
--list option: Example:
To see active hunting tests as well as passive:
kube-hunter --list --active
To see only a mapping of your nodes network, run with
--mapping option. Example:
kube-hunter --cidr 192.168.0.0/24 --mapping
This will output all the Kubernetes nodes kube-hunter has found.
To control logging, you can specify a log level, using the
--log option. Example:
kube-hunter --active --log WARNING
Available log levels are:
By default, the report will be dispatched to
stdout, but you can specify different methods by using the
--dispatch option. Example:
kube-hunter --report json --dispatch http
Available dispatch methods are:
When running as a Pod in an Azure or AWS environment, kube-hunter will fetch subnets from the Instance Metadata Service. Naturally this makes the discovery process take longer.
To hardlimit subnet scanning to a
/24 CIDR, use the
Custom hunting enables advanced users to have control over what hunters gets registered at the start of a hunt. If you know what you are doing, this can help if you want to adjust kube-hunter's hunting and discovery process for your needs.
kube-hunter --custom <HunterName1> <HunterName2>
Enabling Custom hunting removes all hunters from the hunting process, except the given whitelisted hunters.
--custom flag reads a list of hunters class names, in order to view all of kube-hunter's class names, you can combine the flag
--raw-hunter-names with the
kube-hunter --active --list --raw-hunter-names
Notice: Due to kube-huner's architectural design, the following "Core Hunters/Classes" will always register (even when using custom hunting):
There are three methods for deploying kube-hunter:
You can run kube-hunter directly on your machine.
You will need the following installed:
pip install kube-hunter
Clone the repository:
git clone https://github.com/aquasecurity/kube-hunter.git
Install module dependencies. (You may prefer to do this within a Virtual Environment)
cd ./kube-hunter pip install -r requirements.txt
If you want to use pyinstaller/py2exe you need to first run the install_imports.py script.
Aqua Security maintains a containerized version of kube-hunter at
aquasec/kube-hunter:aqua. This container includes this source code, plus an additional (closed source) reporting plugin for uploading results into a report that can be viewed at kube-hunter.aquasec.com. Please note, that running the
aquasec/kube-hunter container and uploading reports data are subject to additional terms and conditions.
The Dockerfile in this repository allows you to build a containerized version without the reporting plugin.
If you run kube-hunter container with the host network, it will be able to probe all the interfaces on the host:
docker run -it --rm --network host aquasec/kube-hunter
Note for Docker for Mac/Windows: Be aware that the "host" for Docker for Mac or Windows is the VM that Docker runs containers within. Therefore specifying
--network host allows kube-hunter access to the network interfaces of that VM, rather than those of your machine.
By default, kube-hunter runs in interactive mode. You can also specify the scanning option with the parameters described above e.g.
docker run --rm aquasec/kube-hunter --cidr 192.168.0.0/24
This option lets you discover what running a malicious container can do/discover on your cluster. This gives a perspective on what an attacker could do if they were able to compromise a pod, perhaps through a software vulnerability. This may reveal significantly more vulnerabilities.
job.yaml file defines a Job that will run kube-hunter in a pod, using default Kubernetes pod access settings. (You may wish to modify this definition, for example to run as a non-root user, or to run in a different namespace.)
kubectl create -f ./job.yaml
kubectl describe job kube-hunter
kubectl logs <pod name>
To read the contribution guidelines, Click here
This repository is available under the Apache License 2.0.