• This framework has been developed during my master thesis for the master degree in Information and Communication Engineering @UniTN - Course Description
• If you want to discover every detail about the choices motivations and experiments you can check my Final Dissertation out.
• Instead, for a brief overview you can check out my Final Presentation.
• Here below I will explain how you reuse the code or repeat the experiments performed.
• Please you find this work helpful or interesting just drop a comment and let me now, if you have problem or curiosities do not hesitate to contact me.

Transcoding comparison between three randomly sampled areas and the three type of transcoders implemented

Classification results comparison using different pretrained models and different amount of labelled data

The repo is structured as follows:

. 
├── Data                                        
│   ├── Datasets 
│   ├── Test            ⮕ Here store the patches prepared accordingly to Lib/Dataset/EUSAR/
│   ├── Train           ⮕ For train and test sets
├── Docker              ⮕ Here is store the docker file configuration
├── Docs 
│   ├── arch            ⮕ Here there are some architecture images
│   └── manuscript      ⮕ Here there is the final manuscript
├── Lib                 ⮕ Here there are all the code resources
│   ├── Datasets 
│   │   ├── EUSAR       ⮕ Dataset Pytorch class overload
│   │   ├── processing  ⮕ Dataset preprocessing
│   │   └── runner      ⮕ Some runners to perform dataset processing
│   ├── Nets            ⮕ Here there is the implementation for each network deployed in this framework
│   │   ├── BL          ⮕ Fully supervised framework used as benchmark
│   │   ├── CAT         ⮕ Supervised Conditional Adversarial Transcoder
│   │   ├── Cycle_AT    ⮕ Unsupervised Cycle-Consistent Adversarial Transcoder
│   │   ├── RT          ⮕ Supervised Regressive Transcoder
│   │   ├── SN          ⮕ Segmentation Network to perform semantic segmentation using the features
                          learning during the transcoding phase.
├── eval.py     
├── mainBL.py           ⮕ Main file to train the Baseline
├── mainCAT.py          ⮕ Main file to train the Conditional Adversarial Transcoder
├── mainCycle_AT.py     ⮕ Main file to train the Cycle-Consistent Adversarial Transcoder
├── mainRT.py           ⮕ Main file to train the Regressive Transcoder
├── mainSN.py           ⮕ Main file to train the Segmentation Network
├── readme.md

• Create the dataset. This file EUSARDataset.py implements a Pytorch Dataset. To work with it the data has to be stored as specified in the file in the folders of Data.
• The docker folder stores the file employed to built my docker image which is public myDocker. It includes the pytorch docker image with some additional library and setting.
• Docs store the final report of this work, so for any doubt refer to it, you can find almost everything.
• In Lib there are all the libraries used to perform the network's operations.
• Once you have prepared the repo, the dataset, and the docker image you can run the main files.

The data employed in my work was coupled radar and optical images:

• Radar images was dual polarized C-Band Sentinel-1 products
• Optical images was RGB+NIR Sentinel-2 images
• The labelled set was composed of
• Forests.
• Streets.
• Fields.
• Urban.
• Water.

All the images employed were 10x10 meters resolution. You can follow the instruction EUSARDataset.py and create a dataset compliant with my EUSARDataset class or recreate your own, In the former you have 100% compatibility, in the latter you could encounter some problems.

All the training of the networks implemented have been performed on an Nvidia GeForce RTX 2070 SUPER with 8GB of dedicated memory. The code requires at least 8 GB of free GPU and 8 GB of free RAM. In the report you can find approximately the running times.

To prepare the docker you can run this command:

docker create --name [yourPreferredName] --gpus all --shm-size 8G -it -v [folder/Path/To/Project]:[Folder/In/The/Docker] cattale/pytorch:latest

Between square brackets are parameters you can change:

• [yourPreferredName] choose a name for your container (here you should clone the project)
• [folder/Path/To/Project] the folder in which you store your project
• [Folder/In/The/Docker] folder in the docker container where you will run your code

Now you need to configure the scripts to run the test you want to perform. The parameters are configured as follows when a script is launched:

• The general_parser.py defines all the configurable parameters. So refer to it for a detailed list
• After the parsing of the argument passed to the script is possible to modify them in a mask in the mains using the specific_parser.py. This script basically overwrite the argument which are specified, it is useful when a lot of parameters change over tests.
• Lastly the config_routine.py is run. This script configures the environment based on the parameters defined.

To run the script follow these instructions.

• Start your docker container using the command docker container start [container_name]
• Then enter in your container using the command docker container attach [container_name]
• Now navigate in the container up to the project folder and run one of the provided mains.
• mainBL.py
• mainRT.py
• mainCAT.py
• mainCycle_AT.py
• mainSN.py
• To run the script above run the command python main*.py

Last but not least this implementation is based on the work of Zhu et al. 2017a.