Next generation command palette using KAVI interfaces exceeding capabilities of typical sublime like command palettes
Current interfaces provided:
Once the working view is populated with commands that are used frequently, you should be able to experience the following benefits:
enter. The first item will already be selected, no other key strokes required. This feature can also be used in the
Finderinterface for navigating among recently viewed or opened files.
shift+enterallows to launch the interface without moving your hands from natural typing position and immediately follow with typing into the input filter to select a command to execute. Also, it becomes very natural to re-execute the last command with a very fast sequence of
shift+enter enterwhich can be executed fast enough that you may not even see the interface fully appear.
enter. Additionaly, the interface has a
fast selectfeature allowing you to execute any item in the list without scrolling, cursor down, or using the mouse.
The Optimum Exerpience should look something like the following:
In this short clip, the time to launch and execute commands is subsecond. This is all done without hot keys. Abreviations of the commands we use are easier to remember and faster to execute all without leaving our typing flow. Since the default command list is our set of recent or favorites, the selections become predictable and often can be done utilizing only 1 or 2 characters.
All available commands available to key bindings can be found by going to the Eclipse key preferences and searching for
shift+enter- This is one of the fastest launching bindings possible which also does not interrupt the typing flow. You will likely need to bind this for both
windows and dialogsas well as
text editing. The exact terms and options differ for different platforms and plugins installed.
shift+space- This is another very fast binding, but for some this binding may be hit sometimes accidentally. Otherwise, you might opt to replace the default
open resourcebinding to use
Finderinitially opens your
workingview which contains the list of items you have been using recently. The first time you launch, these will be blank.
tabkey to switch to the
discoverymode to find items.
workingview will be populated with items you commonly use and you will only infrequently need to switch to
Contiguous characters matched using a fuzzy strategy that attempts to match words in any order. A space separating words will force matching of the literal words also allowing for out of order matces.
Fuzzy matching also will attempt to match by acronym. You can force acronym pattern matching by preceding the input with a space.
Items are sorted first by rank and then by name. This allows for grouping of items by rank and easier identification of items within the ranked group.
Fast select allows list actions directly on target items without needing to navigate to the item with mouse or keyboard cursor.
This mode is enabled when typing
/ in the filter input.
Fast Select enabled, typing the letters in the fast select guide next to the row immediately inititates that row action.
Fast Multi Select allows fast selection of multiple items. This mode is active when
// is entered in the input field.
A range can be selected by starting the row identifier with
-. The range will be applied from the last selected item and will use the selected state of the that same item.
Inverse select will inverse all selections currently in the filtered view.
Inverse select is performed by pressing
! after the fast select slashes
If any items in the view are selected, this action will deselect all selected. Otherwise, this same action will select all in the filtered view.
All select/deselect is performed by pressing
space after the fast select slashses
crtl+j will page down in the list.
ctrl+k will page up in the list.
ctrl+j will move to beginning of input field
ctrl+l will move to the end of the input field
Working is a view of the set of items that consist of favorites and or recently used items.
This view is intended to be the primary view that you would use most of the time and therefore is the default view.
However, this view does need to be primed before it is useful. Over the course of a few days this view would accumulate actions or items you are currently using.
Discovery is a view of all possible items. Selection of items from Discovery will add them to the recent list which makes them appear in the
TAB to instantly switch view modes between
Recent items are shown in the
Working view. The items are always sorted by most recent. To reuse the last used item, simply open the dialog and press enter which will default to using the first item in the list.
Items can also be permanently added to the
Working view. These are considered favorite items. They are also sorted in by most recently used in the same view as recent items.
A vertical marker bar appears to the left of items which are favorites.
Working set of items is contained within preferences and will be exported and imported with Eclipse preferences.
Working set of items is stored in the global preferences store. Therefore, your recently used commands will still be available across workspaces.
Context actions are those actions that otherwise would require right clicking on an item to bring up another menu or dialog.
Context actions here are initiated using the
The context actions will be performed on all selected items from the previous view.
This action will toggle showing only the selected items in the view. This allows you to type different input filters, select items and then finally see all the items you have selected at once before performing some action on those items.
Favorites can be added or removed through context actions.
Items which are normally sorted by rank or sorted by most recent can be sorted by name using this context action.
All settings and history can be exported to and from a JSON file. Commander settings are per Eclipse configuration and Finder settings are per workspace.
The default mode can be set that the dialog will open when launched. This can be
Specific features for the
Specific features for the
The recent list ordering of items in finder will be updated whenever you change editors in Eclipse.
You can use this to always go back to previous file being editted after opening a view. Just launch the finder and hit
enter to go back to the last editor.
There are multiple types of user intentions when matching
Commander has chosen to focus only on intention #1. Therefore less than 2 letter consecutive intra word matches are ignored. This appears to typically be better when filtering very long lists of thousands of items such as eclipse commands or large project files.
In contrast to other typical fuzzy matching command palletes, Commander does not use unlimited ranking scale. There are only 4 levels of ranking from very strong to weak. This was done to present some order to the found items making it easier to visually assess the information and locate items of interest. Therefore, within each of the 4 ranking categories items are alphabetically sorted.
Unlike other fuzzy matchers,
Commander attempts to take into account the user intention where possible.
For example, terms separated by a
space are considered to be literal words and fuzzy matching is not used.
space can be used to specify intent for literal matching of a single filter term and a leading
space will indicate that the following term should be used as acronym only matching.
Also options to specify how fuzzy a match might also be considered.